FujiFilm Xerox Phaser 6270, Руководство пользователя, Страница: 46 / 90

46
3 Troubleshooting
Streaks appear inside or
outside of halftone images.
Shadow is printed around
solid-filled images. The paper that had been stored unwrapped for an extended period of time (especially in
low humidity condition) may be used. Load fresh paper.
The paper is not appropriate for the printer. Load appropriate paper.
The feed roller is old or damaged. Replace the feed roller.
Refer to
• "Replacing the Feed Roller" (P. 70)
Ink smudges off when rubbed
with a finger.
Toner is not fused to the paper.
Output is smudged with toner. The paper type of the selected paper tray is not appropriate. Change the [Paper Type]
setting and try printing again. For example, if [Paper Type] is set to [Heavyweight 1], try
changing it to [Heavyweight 2].
The paper is damp. Load fresh paper.
The paper is not appropriate for the printer. Load appropriate paper.
The fuser unit is damaged or deteriorated. The fuser unit may need replacement
depending on its condition. Contact your local dealer.
The whole page is printed
black. Print cartridges may be damaged or deteriorated. They may need replacement
depending on their conditions. Contact your local dealer.
The high-voltage power supply may be at fault. Contact your local dealer.
Output is blank. Multiple sheets were fed at once. Fan the paper and reload it in the tray.
The feed roller is damaged or deteriorated. The feed roller may need replacement
depending on its condition. Contact your local dealer.
The high-voltage power supply may be at fault. Contact your local dealer.
Symptom Cause/Remedy