FujiFilm IS Pro Скачать руководство пользователя страница 195

Страница: 195 / 244

195

Software Installation

• If the camera communicates with the PC successfully,

will be displayed in the control panel and viewfinder.

Photographs can be transferred to the computer as
described in the manual for the supplied software (on
CD).

MEMO

See the manuals provided with the supplied software for
more information.

CAUTION

• IS Pro is compatible with MTP/PTP (Picture Transfer

Protocol). A MTP/PTP-compatible camera is a camera
which can recognize the PC and printer automatically
when connected.

• Always use the FUJIFILM AC Power Adapter AC-

135VN (sold separately). If the camera suddenly loses
power during data exchange, the memory card could be
damaged.

• Do not disconnect the USB cable (mini-B) when the

camera is communicating with a PC. If disconnecting
the USB cable (mini-B) during communication, the files
on the memory card may be destroyed.

• In Mac OS X, you must set the automatic setup when

the first time you connect the camera to your PC.

• Make sure that USB cable (mini-B) is connected

correctly and pushed in.

• Perform pre-arranged steps to disconnect and turn off

the camera (

➝

p.197).

• Auto power save is disabled during USB connection.
• Before replacing the memory card, always disconnect

the camera from the PC. See p.197 for information on
the disconnection procedure.

• The camera and PC may be exchanging data even

when “Copying” disappears on your PC screen. Before
disconnecting the USB cable (mini-B), always check
that the access lamp is off.

• An image taken with CCD-RAW (

➝

p.93) setting is

required to be transferred to a PC using FinePixViewer.

• When Windows 98 SE is used, the supplied software

must be installed first before connecting the camera to
a PC using the USB cable. The PC will not recognize
the camera if it is connected before the installation.

Continued

Содержание IS Pro





















































































































































































































































Результаты поиска

Содержание IS Pro

Отзывы:

Похожие инструкции для IS Pro

Бренды по названию

Популярные бренды

FujiFilm IS Pro, Руководство пользователя

Результаты поиска

Содержание IS Pro

Отзывы:

Похожие инструкции для IS Pro

Бренды по названию

Популярные бренды