FujiFilm IS Pro Скачать руководство пользователя страница 117

Страница: 117 / 244

117

Advanced Features —

Photography

CAUTION

• Do not remove or replace the memory card while

recording a multiple exposure.

• The information listed in the playback photo information

display (including date of recording and camera
orientation) is for the first shot in multiple exposure.

• While multiple exposure mode is in effect, some of the

shooting menus are limited.

• Shooting will end automatically and the shot images up

to that point are recorded as an overlayed single
photograph if:
- No operation is performed for the preset time for the

auto power save function.

- The camera is turned off.
- The battery is exhausted.
-

is pressed.

- SET UP is pressed.

• Dynamic range will be 400% even if [AUTO] is selected

for [

D-RANGE] in multiple exposure shooting.

• Multiple exposure shooting cannot be performed when

ISO auto control is set to ON (in [ISO AUTO CONTROL]
under [ISO AUTO CONTROL] under [

EXPOSURE]

in the [SET UP] menu), or auto bracketing is set.

LIVE VIEW DISPLAY

To manually focus the image more sharply or to check the
image, you can view the image on the LCD monitor while
adjusting the focus.

Set the focus-mode selector to (manual).
(

➝

p.60)

Select [

LIVE VIEW DISPLAY] under

[SHOOTING MENU], or press and hold

Select the display color.

Continued

Press

to select [B&W] or

[COLOR].

Press MENU/OK to confirm the setting.

USE AT MF

LIVE VIEW DISPLAY

YES

CANCEL

B&W

COLOR

Setting the menu (

➝

p.108)

Содержание IS Pro





















































































































































































































































Результаты поиска

Содержание IS Pro

Отзывы:

Похожие инструкции для IS Pro

Бренды по названию

Популярные бренды

FujiFilm IS Pro, Руководство пользователя

Результаты поиска

Содержание IS Pro

Отзывы:

Похожие инструкции для IS Pro

Бренды по названию

Популярные бренды