FujiFilm FinePix FinePix S9600, Руководство по обслуживанию

Страница: 82 / 154

4-14
4. Adjustments
FinePix S9100/S9600 Service Manual
<Cautions During Adjustment>
Adjust the AF-Sensor when the AF-Sensor unit detaches or replaces it from the camera.
As the accuracy of AF distance measurement with the AF-Sensor unit changes with temperature, this adjustment
should be performed immediately after the camera power supply is switched ON.
Errors will occur, and adjustment will become impossible, if adjustment is performed after the internal temperature of
the camera has increased to 35°C or more.
If an adjustment error is displayed when the 900mm conversion lens is used, switch camera power OFF, wait, and
perform the adjustment again.
Purpose: Mechanical adjustment in the horizontal and vertical directions of the AF-Sensor (passive) in relation to the optical
axis of the lens assembly.
<Step 1>
Select [F9] from the
[Adjustment Items Select Screen] . (press [F9] on the PC keyboard)
--> The [AF-Sensor adjustment Screen (Fig. 4-9-1)] appears.
<Step 2>
When preparations are complete, press the Enter key.
--> The [AF-Sensor vertical Adjustment Screen (Fig. 4-9-2)] appears.
AF-Sensor Adjustment
< Adjustment preparation (1) >
Complete the preparation for the AF-Sensor adjustment.
* Refer to the service manual for details.
Remove CONST CASE TOP.
Set the zoom position to the side of the TELE edge.
* Refer to the service manual for details.
When preparation are complete, Press the [Enter] key.
<Fig. 4-9-1>