FujiFilm FinePix FinePix S9600, Руководство по обслуживанию

Страница: 77 / 154

4-9
4. Adjustments
FinePix S9100/S9600 Service Manual
<Step 4>
—> The [Firmware version check] screen appears.
<Step 5>
—> The [Adjustment Items Select] screen appears.
<Note>
(1) [F1] Battery Adjustment cannot be run unless the Power Cable Jig is used to supply power to the camera.
(2) When new MAIN PWB ASSY is replaced, MAIN PWB ASSY is automatically initialized. At that time, wait for one-two
minutes, and advance the adjustment according to the instruction of the adjustment software.
FinePix S9100_9600_W Adjustment Software
< Camera Jig Mode Setup Procedure >
1. Set the mode to the [AUTO] mode.
2. Open the Card cover.
3. Connect the USB cable.
4. Supply 5.0+-0.1V to the camera using the [DC Jack cable]
as appropriate for the adjustment details.
5. Switch camera power ON while pressing the shutter button.
6. Ensure that the LED is lit.
When steps 1 to 6 are complete, press the [Enter] key on the PC.
<Fig. 4-7-3>
FirmWare = 1.06
Vendor Name =FUJIFILM
Manufacturer =FUJIFILM
ProductName =FinePix S9100
Device Type
=CAMERA
SerialNo =592D313139370605187AB0100438E1
Frame Work =1.00
Please download a new version if it is necessary
to download the firmware.
Advance to the adjustment item selection screen
when press the [Enter] Key of PC.
<Fig. 4-7-4>