137
Appendices
[CARD ERROR]
• The Memory Card contact area is soiled.
• The Memory Card format is incorrect.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (
➝
p.113) . If the message still
appears, replace the Memory Card.
• Camera fault.
• The Memory Card is damaged.
• Inserted Memory Card is not compatible with your
camera.
• Contact your FUJIFILM dealer.
• Insert a compatible Memory Card that is
operationchecked at FUJIFILM Corporation.
[
\
MEMORY FULL]
[
Y
MEMORY FULL]
The internal memory or Memory Card is full.
Erase some images in internal memory or Memory
Card (
➝
p.45), or use a Memory Card that has ample
free space.
[WRITE ERROR]
• The data could not be recorded due to a Memory
Card error or a connection error between the
Memory Card and camera.
• The image cannot be recorded as it is too large to
fit in the available space on the Memory Card.
• The Memory Card or internal memory is not
formatted.
• Re-insert the Memory Card or turn the camera off
and then on again. If the message still appears,
contact your FUJIFILM dealer.
• Use a new Memory Card.
• Format the Memory Card or internal memory on
the camera (
➝
p.113).
[PROTECTED CARD]
The SD Memory Card switch is slide to the “Lock”
side.
Unlock the protection by sliding it back (
➝
p.20).
[INTERNAL MEMORY IS
FULL
INSERT A NEW CARD]
The data could not be recorded or copied since the
internal memory is full.
Erase some images from the internal memory
(
➝
p.45), or use a Memory Card that has ample free
space.
[
r
BUSY]
The timing for recording was incorrect because the
Memory Card was formatted on a PC.
Use an Memory Card that was formatted on the
camera.
[FRAME NO. FULL]
The frame number has reached 999-9999.
No more pictures can be taken.
A
Insert a formatted Memory Card into the camera.
B
Set [RENEW] as [FRAME NO.] setting in the [
U
SET-UP] menu (
➝
p.111).
C
Start taking pictures (The frame number starts
from “100-0001”).
Warning Displayed
Explanation
Remedy
Continued
Q
