18
1
19
If the date/time setting has been cleared, a
confirmation message appears on the LCD
monitor. To set the date/time, press the
“MENU/OK” button (
➡
P.19).
H
: The DATE/TIME setting screen appears.
J
: The camera remains in Still image,
Movie or playback mode.
3
1
Press the “MENU/OK” button to display the
menu screen.
2
Use “
d
” or “
c
” to select “
d
”, and then use “
a
(
[
)” or “
b
(
]
)” to select “SET–UP”.
3
Press the “MENU/OK” button.
2
1
0
3
0
1
0
2
0
1
SETTING THE DATE AND TIME
SWITCHING ON AND OFF
Blank
Blinking
Lit
With the LCD monitor on, you can check the
remaining charge in the battery.
1
Battery has ample charge (No indicator
displayed).
2
The battery charge is low. Have a new set of
batteries ready.
3
The battery is exhausted. The display will
shortly go blank and the camera will stop
working. Replace or recharge the battery.
4
●
!
If the battery charge is depleted, you may not be
able to switch the LCD monitor on.
If the date was cleared and you selected “
H
”,
proceed from step
(
➡
P.20).
3
1
The “SET–UP” screen appears.
Use “
a
(
[
)” or “
b
(
]
)” to select “DATE/TIME”.
2
Press “
c
”.
●
!
See P.58 for more information on the “
d
OPTION”
menu.
●
!
If at least 10 minutes have passed since the AC
power adapter was connected or the battery inserted
and date and time set, then those settings will be
maintained for roughly 12 hours even when the
camera has no power supply (when the AC power
adapter is disconnected and the battery is removed).
0
2
●
!
If you do not set the date and time, this confirmation
screen will appear each time you switch the camera on.
