FujiFilm FAH-100LC, Руководство пользователя

Страница: 3 / 24

-1-
Rev.1 13/12/16
１．ＳＡＦＥＴＹ
FUJI INDUSTRIAL TECHNIQUE CO., LTD. cannot be held responsible for applications other than
those for which VLX hoists are specifically intended.
･Repair all air leaks. ･Report and do not use a hoist with a kinked,
･Keep all air lines clean and dry. twisted, damaged or worn chain.
･Maintain firm footing when operating ･Lift only with chain properly seated in all
hoist controls. chain wheels and sprockets.
･Use properly sized load slings ･Load hoist gradually and avoid all sudden shock
and seat firmly in hook. loading of hoist system.
･Close hook latch and keep load away ･Use the load chain as intended, do not wrap
from latch. it around load or use as sling.
･Move load only when free and all obstacles ･Load all slings, ropes, and chains equally.
can be cleared. ･Apply no loads to the tip of the hook.
･Take up slack slowly, check balance ･Center load under hoist before lifting.
and load before lifting further. ･Pay full attention to the operation of the hoist.
･Avoid swinging load and hook. ･Operate hoist only to the limit of the chain travel.
･Keep all personnel clear of suspended load. ･Use the proper controls, not the limit switches,
･Warn all personnel of approaching load. to stop the load.
･Protect load chain from weld spatter ･Lift, support, and transport only materials,
and other containments. never use for personnel.
･Promptly report any malfunction, damage, ･Lift loads around, never over, personnel.
or unusual operation. ･Secure suspended loads if left unattended.
･Inspect hoist regularly and keep ･Sharp contact between hoist and obstructions is
appropriate records. to be avoided.
･Use only the recommended parts when repairing ･Use no part of the hoist as ground for welding.
any parts of the hoist system. ･Keep all live welding electrodes away from hoist.
･Use hook latches whenever possible. ･Keep welding heat away from all hoist parts.
･Lubricate the load chain regularly ･Keep all warning and operating labels in
as recommended. good condition.
･Lift no more then the rated load of ･Allow only qualified personnel to repair
the weakest component. and maintain hoist.
･Lift only loads that you are certain will not ･Replace a short or damaged load chain instead of
overload hoist system. attempting to lengthen or repair.
･Measure load properly, not with the load ･Unload hoist before performing maintenance.
limiting device.