CR-IR346RU
Service Manual
IN - 31
010-051-00
10.10.2000 FM2887 (1)
IN - 31
(2) Drill holes for embedding the anchor nuts and then embed the anchor nuts.
52mm
18
φ
FR6H7723.EPS
Anchor nut
Na12
#1 [Attach]/#3 [Remove]
Bolt 12x20 (x4)
W12 (x4)
#2
[Embed] Anchor nut
(3) Secure the machine in place.
◆
NOTES
◆
When securing the adjustable feet, pay attention to the following points.
• The four adjustable feet should be evenly loaded.
However, if there is too little space on the right and left sides in the machine installa-
tion place to secure the adjustable feet on the rear side, the two adjustable feet on
the front side should be secured in place. In this case, the two adjustable feet and
two casters should be evenly loaded.
• When the adjustable feet are secured, the casters should be detached from the floor.
FR6H7614.EPS
#3
[Move] Machine
#4
[Secure] Bolt 12x20, W12 (x2)
#2
[Secure] Bolt 12x20, W12 (x2)
#1
[Secure] Adjustble foot
Na12 (x4 or x2)
010-051-01
08.30.2001 FM3058
