Fuji Xerox DocuPrint M215 fw, Руководство пользователя

Страница: 207 / 476

Copying 206
Making Copies From the Document Glass
NOTE:
• A computer connection is not required for copying.
• For the DocuPrint M215 fw, Ensure that no document is in the ADF. If any document is detected in the ADF, it
takes priority over the document on the document glass.
• Contaminants on the document glass may cause black spots on the copy printout. For best results, clean the
document glass before use. For more information, see
"Cleaning the Scanner" on page 443 .
To make a copy from the document glass:
1
Open the document cover.
2
Place the document face down on the document glass and align it with the registration guide on
the top left corner of the document glass.
3
Close the document cover.
NOTE:
• Leaving the document cover open while copying may affect the copy quality and increase the toner
consumption.
• If you are copying a page from a book or magazine, lift the document cover until its hinges are caught by
the stopper, and then close the document cover. If the book or magazine is thicker than 20 mm, start
copying with the document cover open.
CAUTION:
• Do not apply excessive force to hold thick document on the document glass. It may break the
glass and cause injuries.