Fuji Xerox ApeosPort-II C2200, Руководство по эксплуатации функций

Страница: 120 / 137

10 System Settings
118
Sy
st
em
S
e
ttin
gs
10
Note • You can set this item when [SMB Server Setup] is [By Domain Name].
Important • Use the NetBIOS domain name for the domain name.
„ Server - IP Address
Enter the server IP address using values from 0 to 255.
Note • You can set this item when [SMB Server Setup] is [By Domain Name and IP Address].
• 224.XXX.XXX.XXX, 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
„ Server - Server Name
Enter the name of the server. Up to 64 characters are allowed.
Note • You can set this item when [SMB Server Setup] is [By Domain Name and Server Name].
Important • Use the NetBIOS computer name or full computer name with DNS suffix for the server
name.
PKI Settings (Public Key Infrastructure)
You can make the settings for SSL/TLS, S/MIME, and PDF/DocuWorks Signature.
Note • Before setting the HTTP-SSL/TLS communication or S/MIME, the device certificate must be
set. For information on the certificate, refer to the Network Administrator Guide.
SSL/TLS Settings
Configure the settings of SSL/TLS.
„ Device Certificate - Server
Select a certificate to be linked.
„ SSL/TLS Communication
Select whether to enable or disable the SSL/TLS communication
„ SSL/TLS Port Number
Set the SSL/TLS communication port number in the range from 1 to 65535.
The standard port number is 443.
„ Device Certificate - Client
Select a certificate to be linked.
„ Remote Server Certificate Validation
Select whether to enable or disable a certificate of a remote server.
S/MIME Settings
Configure the settings of S/MIME.
„
Device Certificate - S/MIME
Select a certificate to be linked.
For information on the certificate, refer to the Network Administrator Guide.
„ S/MIME Communication
Select whether to enable or disable the S/MIME communication.
„ Receive Untrusted E-mail
If you select [Off], the machine does not receive the following e-mail: