Fuji Xerox ApeosPort-II C2200, Руководство по эксплуатации функций

Страница: 117 / 137

Differences in Network Settings
115
Sy
st
em
S
e
ttin
gs
10
„ Secondary Server Port Number
Set the secondary server port number in the range from 1 to 65535.
„ Realm Name
When using Active Directory of Windows 2000 Server or Windows Server 2003, set the
domain name of Active Directory in [Realm Name]. Up to 64 characters are allowed.
Important • Enter a realm name with capital letters. Otherwise, an authentication error occurs.
LDAP Server/Directory Service
Configure the directory server, authentication method, and search attributes and
ranges for LDAP authentication and address book search by LDAP.
„ Primary Server Setup
Select the primary server specification method from [By IP Address] and [By Server
Name].
„ Primary Server IP Address
Enter the primary server IP address using values from 0 to 255.
Note • You can set this item when [Primary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX, 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
„ Primary Server Name
Enter the name of the primary server. Up to 64 characters are allowed.
Note • You can set this item when [Primary Server Setup] is [By IP Address].
„ Primary Server Port Number
Set the Primary server port number in the range from 1 to 65535.
„ Secondary Server Setup
Select the secondary server specification method from [By IP Address] and [By Server
Name].
„ Secondary Server IP Address
Enter the secondary server IP address using values from 0 to 255.
Note • You can set this item when [Secondary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX, 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
„ Secondary Server Name
Enter the name of the secondary server. Up to 64 characters are allowed.
Note • You can set this item when [Secondary Server Setup] is [By Server Name].
„ Secondary Server Port Number
Set the secondary server port number in the range from 1 to 65535.
„
Authentication with SSL
Configure whether to use SSL Communication for LDAP authentication and address
book search by LDAP.
To use the SSL communication, [Primary Server Port Number] and [Secondary Server
Port Number] must be set. The port number for the SSL communication of the LDAP
directory server is 636, in general.