Fuji Xerox ApeosPort-II C2200, Руководство по эксплуатации функций

Страница: 119 / 137

Differences in Network Settings
117
Sy
st
em
S
e
ttin
gs
10
„ Server Application
Select the software used by the directory server, from [Microsoft Active Directory],
[Novell NetWare 5.
∗
], and [Other Applications].
„
Attribute Type of Recipient Name
Set the recipient name attribute type. Up to 32 characters are allowed.
„ Attribute Type of Last Name
Set the sender's family name attribute type. Up to 32 characters are allowed.
„ Attribute Type of First Name
Set the sender's first name attribute type. Up to 32 characters are allowed.
„ Attribute Type of E-mail Address
Set the e-mail address attribute type. Up to 32 characters are allowed.
„ Attribute Type of Custom Items 1 to 3
Set the LDAP attribute type of custom items 1 to 3. Up to 32 characters are allowed.
„ Attribute Name of Custom Items 1 to 3
Set the attribute names assigned to custom items 1 to 3. You can enter up to 16
characters.
„ Attribute Type of Certificate
Set the certificate attribute type. Up to 32 characters are allowed.
„ Maximum Number of Search Results
Set the upper limit on the number of searched address results from 5 to 100. If there
are more search results than the upper limit, the search operation is stopped at that
number.
„ Search Time-Out
Select whether or not to set a search timeout. Set the value from 5 to 120 seconds in
1 second increments.
„ Directory Service for Address Book
Select whether to use an address book stored on the directory server.
Even when [On] is selected, unless the following conditions are satisfied, the address
book of the directory server will not be started.
z
The IP address of the directory server (primary) of the machine must be set
z
The IP address or Internet address of the directory server (primary) must be set
z
The port numbers used for LDAP communication must be set on the directory server
and the machine
SMB Server Settings
„ SMB Server Setup
Select the server specification method from [By Domain name], [By Domain Name and
IP Address], and [By Domain Name and Server Name].
„ Server - Domain Name
Enter the domain name of the server. Up to 15 characters are allowed.