Fuji Xerox ApeosPort C5570, Справочное руководство

Страница: 202 / 290

202
8 Maintenance

When the unprinted page is larger
6.
Tap [Next].
7.
Under [Single Fold], select either [Long at Left] or [Long at Right].
8.
Enter the value measured in Step 5, and then tap [Save].
9.
Tap [Sample Printout], and then check the adjustment result of the output sample. Adjust again if necessary.
10.
Tap [Save].
Booklet position adjustment
1.
Tap [Booklet].
2.
Tap [Paper Supply], and then choose the paper that was loaded.
3.
For [Adjustment Method], select either [Standard] or [Variable Sheet].
Note
 When [Variable Sheet] was selected, configure the number of pages for [Sheets to be folded (3–15)].
4.
Tap [Sample Printout], and then tap [Next].
5.
Check the output sample that was printed, and then measure the offset amount.

If there is no offset, no adjustment is required.

When the staples are on the printed side
Select [Long at Left], and then enter the offset amount.
Select [Long at Right], and then enter the offset
amount.
Adjustment is not needed.
Select either [Long at Left Left Staple] or [Long at Right
Left Staple], and then enter the offset amount.