Fuji Electric ZSS-7, Инструкция по эксплуатации

Страница: 68 / 116

INZ-TN7ZSS-E
- 61 -
Select “ON” or “OFF” by the key or the
key, and press the key.
( )
When “OFF” is selected, the cursor returns to the
“H-Limit”. When “ON” is selected, the
moves to “Range1” of H-Limit or L-Limit.
6.3.2 Setting of alarm value
Make a setting of the High/Low limit alarm for the measured concentration. To change the alarm setting, set
the Alarm ON/OFF setting to ON, and then change the numeric value.
Note
Point the to “H-Limit” to change the setting of H-Limit value, and point “L-Limit” to change the set-
ting of the L-Limit value.
Point the to “H-Limit” to set the H-limit val-
ue, and point “L-Limit” to set the L-Limit value,
and then press the key.
( )
ENT
Alarm Setting
H- Limit
ON
Range1
15
ppm
Range2 ppm
L-Limit
ppm
ppm
Hysteresis %FS
Analog Output
Range2 H-Limit
Alarm Record
50.00
30.00
10.00
00.00
Range1
Range2
2006-04-01
12:00:00
Alarm Setting
H- Limit
OFF
Range1
15
ppm
Range2 ppm
L-Limit
ppm
ppm
Hysteresis %FS
Analog Output
Range2 H-Limit
Alarm Record
50.00
30.00
10.00
00.00
Range1
Range2
Alarm Setting
H- Limit
OFF
Range1
15
ppm
Range2 ppm
L-Limit
ppm
ppm
Hysteresis %FS
Analog Output
Range2 H-Limit
Alarm Record
50.00
30.00
10.00
00.00
Range1
Range2
2006-04-01
12:00:00
2006-04-01
12:00:00