4
Production year
：
Last digit of year (7
⇒
2007)
Production lot serial number
Production month
(1 to 9
：
January to September, X
：
October, Y
：
November, Z
：
December
)
01
7
5
1
Production week in the month
(1 to 6)
Nameplate
Figure 1.2 Nameplate
1.4 Accessories
Confirm that the following accessories are included in the package:
1.
Instruction
Manual
･･････････
1
2. Accessories 1) Plug for TERM1
･･････････
1
1.5 Installation Procedure
WARNING
•
Turn off the power and wait for at least five minutes before starting installation. Further, check that the LED monitor is
unlit and check that the DC link bus voltage between the P (+) and N (-) terminals is lower than 25 VDC.
Otherwise, electric shock could occur.
CAUTION
•
Do not touch any metallic part of the connector for the main unit (CN1) or any electronic component. Otherwise,
electronic components may be damaged by static electricity charged in your body. Also, the stain or adhesion of sweat
or dust may adversely affect the contact reliability of the connector in the long run.
An accident could occur.
