FuG Elektronik MCA 3000 Скачать руководство пользователя страница 16

MCA -Serie 

FuG Elektronik GmbH, Am Eschengrund 11, D - 83135 Schechen 

 

File: MCA Rev_3 Englisch.docx  

Rev 3 

16 von 16 

8.  Calibration 

Certificate of Calibration

 

All guaranteed data for our power supplies are tested in the factory and documented 
in an internal test protocol. Furthermore we offer within the scope of our  
ISO 9001 : 2008

 

certified quality system a calibration in our plant. The customer 

receives a certificate of calibration. We certify the output data and the compliance with 
our catalog data. 
The blue calibration sticker refers to the next recommended date of calibration. 

Subsequent Calibration 

Generally we recommend an annual subsequent calibration. 

9.  Certificate of Conformity 

The power supplies carry the CE-sign. Please read the Certificate of Conformity. 

10.  Accessories 

Connectors, Cables  

See enclosed Mounting Instructions 

Mounting instructions 

Rack Adapter

 

 

Attention! Before opening the power supply, disconnect from mains!

 

The front panel handles must be exchanged separately. (Please don’t exchange 
together, because the front panel would not be fixed).  
Is the power supply only be used as plug-in unit, the stands may be removed.  
For that remove the bottom sheet. The stands can be removed by using a screwdriver 
for recessed-head screws. Then place back the bottom sheet. 

Caution!! 

After removing the stands, the power supply may not longer be used as a table-top 
unit, because no convection cooling is possible, risk for overheating. 

11.  Warranty, Repairs 

Your power supply has been assembled and tested under stringent quality assurance 
procedures. 

We provide a 2 years warranty, commencing with the delivery date stated in the 
serial number. 

This warranty does not cover misuse or attempted repair by untrained personnel. 
Enclosed you will find one set of circuit diagrams for service purposes. 
In all further enquiries for service or spare parts, please provide both the model and 
serial number of the unit 

12.  Special Models, Modifications 

Power Supplies that are equipped with special modifications are identified with "MOD" 
within the type designator (i.e. MCA 750

 

 1500 MOD) on the label at the rear panel . 

Please refer to the separate data sheet attached. 

Содержание MCA 3000

















Отзывы: