FE
48
ELLIPTICAL
12
OPERATION OF
YOUR ELLIPTICAL
FE
48
Console
r
The odometer and time will remain displayed for only a few seconds then the console will go to the
startup display. The dot matrix display will be scrolling through the different workout profiles and
the Message Window will be scrolling the start up message. You may now begin to use the console.
POWER UP
When power is connected to the elliptical the console will automatically power up. These models
are connected directly
to 120 VAC and there is a power switch located where the line cord plugs
into the unit on the left side near the front (See page 4 for location).
When it is first powered on, the console will perform an internal self-test. During this time all the
lights will turn on, the
Message Window
display will show a software version (i.e.: VER 1.0), and the
Distance Window
will display an odometer reading. The odometer shows how many virtual miles
the elliptical has gone. The Time Window shows how many total hours the elliptical has been used.
The odometer and time will remain displayed for only a few seconds then the console will go to the
startup display. The dot matrix display will be scrolling through the different workout profiles and
the
Message Window
will be scrolling the start up message. You may now begin to use the
console.
