Fuba
10
NOTE
The deleted channel will be reloaded on the list during a channels update or a reinstallation of the entire channel list
(section 3.3).
3.2.2
Delete All
Utility to delete all channels.
3.3
Installation menu
During the first installation, an automatic available channel scan is done. Periodically, during the activation of new
television and radio services or modifications by the broadcasters, it is suggested to reinstall or do update the channel
list of the receiver.
3.3.1
Channel Scan
Manual search function of a single frequency. Select the channel/frequency (item
Channel No.
), then press OK on
Search to scan.
3.3.2
Automatica search
Channel scan function on all available frequencies:
1.
Country
: Definition of the country of installation of the receiver.
WARNING
The incorrect setting of the
Country
may result in a partial or even a failure to identify and store channels.
2.
FTA Only
: Possible scanning restrictions of only clear/free broadcasts (
Yes
) or all (
No
).
3.
Search
: Press OK on this menu item to reinstall
the whole channel list.
WARNING
When you do this, previous channel list will be cleared.
3.3.3
Autoscan in Standby
Function dedicated to automatic channel list update configuration during standby mode. It can be enabled/disabled using
the parameter
Autoscan in standby
(
On
/
Off
) and also programmed by entering, with the number buttons 0-9 on the
remote control, a new time (
hh
:
mm
) at
Autoscan in standby time
parameter.
3.4
System Setup menu
3.4.1
Language
You have the following items:
1.
Language
: Language of the menu shown on video (On Screen Display - OSD).
2.
First Audio
: Main audio language for TV programs.
3.
Second Audio
: Secondary audio language for TV programs in the absence of the main one.
4.
Subtitle Language
: Chosen language for the subtitles of TV programs.
NOTE
The proper functioning of the receiver in relation to the above audio and subtitle preferences is conditional on the
presence of the information transmitted at the discretion of the broadcaster of the tuned channel.
3.4.2
TV System
This menu has the following audio and video settings to adjust in line with the characteristics of the audio/video devices
plugged into the receiver:
1.
Video Resolution
: setting of the video resolution HDMI digital audio and video output.
WARNING
If the screen is connected via HDMI shows problems, connect the receiver via SCART to set a compatible resolution
value.
2.
Aspect Mode
: aspect ratio of the screen/TV connected to the receiver, either
16:9
or
4:3
, and of the
relativepresentation of images with different formats from the screen:
a.
16:9Full
: For 16:9 screens. The images transmitted are 4:3, they will be adapted to the entire screen.
b.
16:9 PillarBox:
For 16:9 screens. All the images transmitted in 4:3, the receiver will add two black bars on
the right and left side of the image in order to fill the screen without distorting the original image.
c.
4:3 LetterBox
: For 4:3 screens. For those images transmitted in 16:9, the receiver will add two black bars
on the top and bottom of the image in order to fill the screen without distorting the original image.
d.
4:3 Pan&Scan
: For 4:3 screens. The images transmitted in 16:9 are proportionally adapted to the hight of
the screen, cutting off the side portions.
