Fuba
2
1.2
Product description and connections
1.2.1
Front panel
1.
q
Power on/off button in standby.
2.
▼
Switch to previous channelbutton.
3.
▲
Switch to next channelbutton.
4.
IR Infrared sensor for remote control.
5.
LED LED operating status indicator (
GREEN
) and standby (
RED
).
6.
USB USB connectors to read personal media (video, pictures, music) and videotaping through the integrated digital
terrestrial tuner when it is permitted by the transmission.
WARNINGS
Compatible with USB storage devices formatted with the file system FAT32.
We cannot guarantee compatibility with all USB memory devices on the market.
We recommend using USB HDD with external power supply, since the receiver cannot ensure proper power
supply via the USB port. This will avoid possible damage to the storage device.
1.2.2
Back pannel and connections
1.
RF IN Antenna signal input.
2.
RF OUT Antenna loop output to connect to another device with a digital TV tuner (optional).
WARNING
The antenna loop is always enabled when the receive is in opertate mode. Instead, when the receiver is in standby
mode to save energy (paragraph 3.4.9.3), the RF pass-through output is not active.
3.
LAN Ethernet jack for broadband IP connection.
4.
SPDIF coaxial digital audio output to connect to any multichannel Home-Theater audio amplifier (optional).
5.
HDMI HDMI digital audio-video output for high definition, dedicated to connecting a display with HDMI interface.
NOTE
If the screen is connected to the receiver via HDMI interface presents viewing difficulties, first connect the receiver
via SCART and then adjust the
Video resolution
from the menu System Setup > TV System with the same receiver,
respecting the characteristics of the screen connected.
6.
TV SCART SCART standard resolution analog audio-video output to connect to a monitor/TV, alternative to the HDMI
output.
7.
12V
1A Input power 12V
1A to connect the included power supply which in turn is connected to a power socket
230V~ 50Hz.
