English
ODE8500 T2HEVC
7
Select with the arrow keys
▲
/
▼
the audio track or subtitle you want.
Press OK to confirm.
In addition, under an audio track, the arrows
◄
/
►
help you manage the distribution of audio channels
(
Stereo
/
Mono
/
Left
/
Right
), recommended only for advanced users.
2.6
USB Funtions
The USB port located on the front panel of the device is mainly dedicated to connecting external storage devices with
USB 2.0 interface, in order to record digital terrestrial channels from the built-in tuner or to show personal media.
2.6.1
Use and warnings
Before proceeding to the use of a USB mass storage device, like a hard-drive (Hard Disk drive cooler-HDD) or a flash
memory/Flash, follow the important rules and warnings below.
2.6.1.1
Connection
The USB device must be formatted in FAT32 and to take advantage of the video recording function (para.2.6.2), it must
have a capacity of free memory suited to own needs.
At the first connection of a USB memory device or after any formatting of the same, the receiver will create a folder
named ALIDVRS2 that will be used as an archive for recordings.
WARNINGS
Format exclusively hard drives with external power. The mere USB port cannot guarantee a constant and proper
power supply: There’s a risk of damaging the disk and/or receiver!
The formatting will delete all the files in memory. The data cannot be recovered.
We cannot guarantee compatibility with all USB memory devices on the market.
2.6.1.2
Disk removal
To safely remove the memory, in order to avoid damaging files or devices involved, we recommend disconnecting the
USB memory only by following the instructions in the section of the menu Tools > Remove USB device safely.
WARNING
Never disconnect the USB device during media playback, recording, formatting or when there is an event recording
timer: There’s a risk of damaging the disk and/or receiver!
2.6.2
Personal Video recording (PVR)
Before proceeding with the use of a USB mass storage device, such as a hard-drive (Hard Disk drive cooler-HDD) or a
flash memory/Flash, follow the important rules and information providedin para. 2.6.1.
2.6.2.1
Recorder configuration
Once the USB memory is connected and recognized, enter the menu System Setup > PVR Storage Information and
press BLUE (
DVR Set
) to configure the recorder through the
DVR Type
parameter:
1.
Timeshift
: only Time Shift (para2.6.2.2).
2.
Record
: only recording (para. 2.6.2.3).
3.
REC & TMS
: recording and TimeShift.
NOTE
Recording is only permitted for TV channels transmitted in clear, not for encrypted TV or radio channels.
2.6.2.2
Time Shift
Timeshift is tasked to temporarily record a TV show as soon as you tune into it until you switch channels, then it will
automatically switch to temporarily record the new channel. This enables the
2d
(PLAY/PAUSE) button, the user can
pause and then resume watching the time-shifted program. Next, use the
3
(STOP) button to return toa live viewing.
2.6.2.3
Recording TV programs
NOTES
The receiver is equipped with a single TV tuner, so while a recording is in progress, it will also allow you to view a
different channel, provided that the latter is broadcasted on the same frequency channel being recorded.
You can record up to two contemporary recordings on two channels broadcasted on the same frequency.
Broadcasters may decide to ban recording for issues related to the protection of copyright.
Instant recording
Tune in to the desired channel and press
4
(REC) to start recording manually. It has a default duration of two hours, but,
if you press the
4
(REC) button, you can change it by entering the desired time with the remote (hours and minutes in hh:
mm). To stop recording press the button early
3
(STOP) and confirm.
