Fuba ODE821CI+HD, Руководство пользователя

Страница: 33 / 44

Fuba
4.3.2 Satellite List
Satellite List menu contains a satellite list. Before going ahead with antenna configuration, it is mandatory to choose
at least a satellite from the list or to add a new one (green key). For choosing a satellite from the satellite list, moving
on the list with the keys CH
º
/ CH
»
and then press OK. The functional keys are:
• RED Key : edit a satellite in the satellite list; you can change satellite name and position
• GREEN Key : add a new satellite. It is mandatory to insert a name and a position for the new satellite
• BLUE Key : remove a satellite from the list. A confirm box will appear before removing the satellite
By pressing red key and green key, a new box will appear; this box is used to write/change the name and the position
of a satellite using the numerical keyboard of the remote controller. The functional keys associated to this box are
described on the box itself:
• RED Key : from upper case to lower case and vice versa
• GREEN Key : delete the last inserted character. For deleting a different character move on the string using
VOL
¶
/ VOL
·
and then press green key.
• BLUE Key : exit from the box without saving the changes
• OK/YELLOW Key : saving the changes and close the box
4.3.3 Antenna Setup
The submenus are:
• Satellite : select the satellite name from the ones selected on menu Satellite List (par. 4.3.2 )
• LNB Freq : set the type of LNB (normally Universal 9750-10600 )
• Transponder : select one of the TP of the selected satellite
• DiSEqC1.0 : select the DiSEqC tone for the LNB associated to the satellite (Off when using a motor)
• DiSEqC1.1 : configuration parameter for DiSEqC 1.1 antenna plant (usually for complex plant, select Disable
if not used )
• 22k : only use if LNB Type is NOT set to Universal (i.e. automatic)
• Polarization : select the polarity (H=horizontal, V=vertical)
NOTE
The following examples are
just as an indication , and strictly related to the characteristics of the antenna plant. In
case of need, please refer to the installer
4.3.3.1 Basic Mode
Single LNB antenna plants do not use DiSEqC or other specific communication protocols. In Italy, with a traditional
single LNB antenna plant pointing on Hotbird 13
○
East use the following settings:
• Satellite : Hotbird 13
○
East
• LNB Type : Universal 9750/10600
• DiSEqC 1.0 : Disabled
• DiSEqC 1.1 : Disabled
• Polarization : Automatic
9