700-SDI-RADAR-300WL-Man Rev 2 11 Apr Mar 2022
36
/48
Part# 21371
Amplitude threshold:
Sets the minimum amplitude of the spectral peak in the signal
analysis algorithm required to detect peak and report distance. If no peak above this
value is detected, the sensor will report distance equal to 0. The threshold is used to
filter noise and false readings and it is recommended to keep this value in the range
0 – 1000.
Peak detector type:
Used to configure the type of algorithm used to detect the peaks in
the radar echo curve. The default setting should be Maximum peak. In specific case,
such as when a water level needs to be measured, but there is a lot of vegetation
protruding from the water’s surface, use Last Peak detector type.