FTS LYOSTAR 3, Руководство оператора

Страница: 79 / 82

Rev 006, 01/14 69
© SP Scientific 2014
Appendix
C
Appendix C: Stainless Steel Cleaners
Cleaning Required Cleaning Agent
9
Application Method
10
Effect on Finish
Heat Tint or heavy
discoloration
Penny-Brite or Copper-Brite
Use in direction of polish lines
on No. 4 (polished) finish.
Wipe with dry cloth. May scratch No. 2 (mill-
rolled) and Nos. 7 and 8
(polished) finishes.
Paste Nu-Steel, DuBois Temp,
Tarnite, or Kelox Rub with dry cloth or stainless
steel wool.
Use in direction of polish
lines on No. 4 (polished)
finish. May scratch No. 2
and No. 7 and 8 (polished)
finishes.
Revere Stainless Steel
Cleaner, Take-Off, or AC-60
Apply with damp sponge or
cloth.
Use in direction of polish
lines on No. 4 (polished)
finish. May scratch No. 2
Allen Polish, Steel Bright,
Wyandotte, Bob-O, Zud,
Dubrite, or Prepare Dex
Rub with a damp cloth.
Use in direction of polish
lines on No. 4 (polished)
finish. May scratch No. 2
(mill-rolled) and No. 7 and
No. 8 (polished) finishes.
Tenacious deposits, Rusty
Discolorations, Industrial
atmospheric stains.
Oakite No. 33, Dilac, Texo 12,
Texo N.Y., Flash-Klenz, Caddy
Cleaner, Turco Scale 4368, or
Permag 57
Swab and soak with clean
cloth. Allow to stand 15
minutes or more, per directions
on package. Then rinse and
dry.
Satisfactory for use on all
finishes.
Hard Water Spots and
Scale.
Vinegar
Swab or wipe with cloth. Rinse
with water and dry. Satisfactory for use on all
finishes.
Dilac, Oakite No 33, Texo 12,
Texo N.Y.
Swab with cloth or soak. Let
stand 10-15 minutes. Always
follow with neutralizer rinse,
and dry. Satisfactory for use on all
finishes. Effective on
tenacious deposits or
where scale has built up.
9
Use of proprietary names is only intended to indicate a type of cleaner, and does not constitute any endorsement (nor does
omission of any proprietary name imply its inadequacy). All products should be used in strict accordance with instructions and
warnings on the product package.
10
In all applications, a stainless steel wool, sponge fibrous brush, or pad is recommended. Avoid use of ordinary steel wool or
steel brushes for scouring stainless steel.