700-DTS-12 Rev. 28 - 16 Apr 2020
Page 13/28
Chapter 2
QUICK START GUIDE
This chapter will take you through the steps to set up the DTS-12 to an Axiom Datalogger. It is meant
as a quick reference. Detailed instructions can be found in the Axiom Operator’s Manual.
Connect the DTS-12 sensor cable to the Datalogger on one of the orange SDI ports. In order for the
sensor to start providing data to the Datalogger it must be:
1.
Detected;
2.
Mapped;
3.
Configured; and
4.
Assigned logging.
2.1
Detecting the DTS-12
1)
Select the SDI 12 icon. The Datalogger will look for sensors and display the SDI Sensor
Mapping screen. To detect the DTS 12, select the detect icon (magnifying glass)
Figure 2-1: Sensor Mapping Screen
2)
When
Detect
is pressed, the
SDI Detect
dialog box appears. Leave the checkbox blank.
Select
OK
.
Figure 2-2: Detecting the DTS-12
Leave Blank
