FTS 21216, Руководство по эксплуатации

Страница: 17 / 54

700-SDI-RADAR-LX-80-Man Rev 1 08 Oct 2021 12 /49
RADAR PARAMETERS
The following radar parameters can be configured by connecting the radar to a PC and using the
Instrument Configurator (refer to Chapter 8). Additionally, if using SDI-12 protocols, configuration
can be done through a datalogger and using the SDI-12 commands outlined in Chapter 12.
1)
Communication interfaces
2) Processing parameters
3) Measurement Parameters
5.1 COMMUNICATION INTERFACES
5.1.1 BAUD RATE
Figure 5-1: Baud Rate
RS-232 baud rate: Configures the baud rate (bits per second) for serial communication on the
RS-232 data line. This setting controls how many bits are sent on the communication line in
one second. The available values are standardised. Using higher baud rate over longer lines
may introduce errors in transferred data. The default instrument RS-232 baud rate is
115200 bps.
RS-485 baud rate: Configures the baud rate (bits per second) for serial communication on the
RS-485 data line. This setting controls how many bits are sent on the communication line in
one second. The available values are standardised. Using higher baud rate over longer lines
may introduce errors in transferred data. The default instrument RS-485 baud rate is 9600
bps.
5.1.2 DEVICE ID
Figure 5-2: Device ID