FTS 21216, Руководство по эксплуатации

Страница: 12 / 54

700-SDI-RADAR-LX-80-Man Rev 1 08 Oct 2021 7 /49
ELECTRICAL CONNECTIONS
3.1 CONNECTOR PIN-OUT AND WIRING
The LX-80 sensor is supplied with a robust IP68 M12 connector and cable. The connector and cable
details are shown on Figure 3-1. The user is responsible for connecting the sensor to the data
collection platform using the flying leads. Users can attach their own connector, connect the cable
via a terminal strip, or wire it directly to device electronics. Refer to Table 3-1 for wiring details.
Figure 3-1: M12 connector details
Table 3-1: Wiring Details
PIN # COLOUR PIN NAME PIN DESCRIPTION
1 White GND This pin should be connected to the ground (negative) pole of
the power supply
2 Brown +Vin Power supply. Power supply voltage must be 9 to 27 VDC,
and the power supply must be able to provide at least 0.65W.
3 Green RS232 – TxD RS-232 data transmit signal.
4 Yellow RS232 – RxD RS-232 data receive signal.
5 Grey GND Signal ground.
6 Pink CAN – H CAN2.0B high signal (optional)
7 Blue CAN – L CAN2.0B low signal (optional)
8 Red V+ Output power supply (=Vin) for supply of external optional
equipment and for use with analog 4-20mA output
9 Orange RS485 – D- RS-485 data transmitter/receiver low signal.
10 Dark Red RS485 – D+ RS-485 data transmitter/receiver high signal.
11 Black SDI-12 SDI-12 communication interface
12 Purple 4 – 20 mA Output Analog 4 – 20 mA output