User’s Manual · PVR ST180
Reserved of technical modifications and/or errors
-
36
-
PVR ST180
Version en_1.0
FTE maximal
The options you have right with the list are the following ones:
Delete Transponder: The
RED
key allows you to make a multiple selection of transponders to be deleted. When you
select a TP, it will appear the icon in its column, when you exit of the menu, you will be requested to confirm the
changes.
Edit Transponder: This function with the
GREEN
key will allow you to vary the parameters of the transponder. You can
change the frequency, polarity, symbol rate and FEC. This last parameter can be changed to AUTO mode in case of
unknowing it.
Add Transponder: Like in the previous step, the
YELLOW
key, allow adding new TP to the list.
Skip Transponder: In this function, with the BLUE key, allows that one transponder will be keeped in the list but it will be
not tuned.
Whatever change made over the list of transponders will need to be confirmed with OK button when you
exit the menu.
9.4. Channel Search: Satellite
Once the antenna configuration is completed, you should proceed to tune
the channels from the selected satellites. There are different ways to tune the
channels: through LNB, through Satellites and through Transponders.
Searching channels through LNB:
When you select to search channels through LNB, you only can select one
LNB, which corresponds to the programmed tuner, so if you have more than
one LNB installed and configured, you should proceed with one and then the
other to tune all the received channels.
Searching channels through Satellite:
When you search through satellite, you will have several satellite selections,
so you can programme the searching of all the satellites that you have
configured and in one single process you will find all the channels.
To select the satellites, use the
Green
key, to change the sort of the satellite
list, use the
LIST
key, confirm your multiple selection by pressing
OK
key.
Searching channels through Transponder:
Searching through Transponders is the most selective of all the options. It
allows you selecting the frequencies that you are going to tune and search
channels. By default your equipment shows All the transponders and with
the key you can change this option and make a selection of the
transponders that you want to tune. The selection is made with the
Green
button and it is validated the multiple selection with the
OK
key.
In case of adding some new transponder (see point 9.5 transponders
management) you should tune it in this mode.
In whatever selection, you always will have available to find
Free To Air
(Free channels), channels with
Conditional Access
, or
All
the channels.