User’s Manual · PVR ST180
Reserved of technical modifications and/or errors
-
14
-
PVR ST180
Version en_1.0
FTE maximal
Channel Search: Satellite:
Once the antenna configuration is completed, you should proceed to
tune the satellite channels that you have selected. There are different
ways to tune the channels: through LNB, through Satellites and
through Transponders.
When you select the channel searching through LNB, you only can
select one LNB.
When you are searching by satellites, you are allowed to select a Wide
range of satellites, so you could programme the searching of all the
satellites that you have configured.
The searching through Transponder is the most selective. It allows selecting all the frequencies that you’re
going to tune and searching channels.
In whatever selection, you always will have available to search
Free To Air
channels (uncoded channels),
channels with
Conditional Access
or
All
the channels.
Please, choose the searching pressing the
Green
button. Once you have finished (the time will depend on
the number of transponders it will have to find) you will get a window like the following one:
Detected TV
Detected
Channels
Radio
Channels
Level and Quality
Searching process
Meter
You can select the channel searching whenever pressing the
Exit
button.
Once the searching is finished, you must confirm the storing of a new Channel List.
Press the
OK
button.
The receiver will come back to the Channel Search menu.
You can search again if you want, or exit by pressing the
Exit
button.