User’s Manual · PVR ST180
Reserved of technical modifications and/or errors
-
10
-
PVR ST180
Version en_1.0
FTE maximal
1.4 Fast installation guide
Please, follow the instructions for a faster and simpler installation of the receiver.
Step 1: Connections
Connect the cable from the LNB and Dish:
Connect the cable with the Satellite signal to the
IF IN
input of the receiver.
Connect the cable of the terrestrial antenna:
Connect the cable with the Terrestrial signal to the
ANTENNA IN
connector.
Connecting the TV, LCD or video beamer
Your TV or other equipment can be connected in different ways:
SCART / RGB
In this connector you will find the best Picture quality in RGB and RGB-YUV modes.
This is the connector that you will use normally to connect the TV.
To do it, you should use a Standard SCART – SCART cable.
Video / DVD
In regards to scart VCR-Scart connection, you can connect a VCR or a DVD.
The DVD signal can also be watched through the receiver if the TV is connected using
a Scart.
You will find more information in the chapter 7.4 – System adjustments.
Output LOOP OUT
You can connect this output to the antenna input of your TV or VCR to receive the
analogue terrestrial signal.
You can find more detailed information in the chapter 0.2 Back Panel
This receiver has a main switch at the back panel.
If you see a message “shortcircuit in the antenna” in the screen, you have a shortcircuit
in the antenna. Please, verify it and restart the receiver.
When you configure the system for the first time, the current date will be stored in
Menu > System Preferences >
Version
as the warranty start time.
Second Step: Main settings on the receiver
When you start the first time the receiver or when you execute a “factory default” process, you will see this
installation guide in English language.
The selection of the menu options will be done with the arrow buttons
,
and the button
OK
of the remote control.
Your remote control disposes of 3 different code tables for the communication with the receiver. By default,
the selected table is the number 1, which corresponds to the Satellite reception equipment. Normally it
should not be changed when the batteries are installed for the first time.
Please, verify that when you push whatever key, the lighted code is the 1. In other case, use the
CODE
key to modify this selection.