FSR MAS-7000, Инструкция по установке и эксплуатации

Страница: 17 / 52

17
MAS-7000
very low Shrink value like 10%).
Scaler Adjust Scaler Adjust
Aspect change [Normal] Aspect change [Normal]
With this menu, the images’ aspect ratio can be set to properly match the display. The choices are Normal,
Letter box and Pillar box.
Scaler Adjust Scaler Adjust
Aspect adjust[Simple] Aspect adjust[Simple]
This parameter is used in conjunction with the Zoom and Shrink functions. When set to “Advanced”, it allows
the horizontal (H) and vertical (V) components of the Zoom and Shrink functions to be adjusted independently,
thus allowing custom aspect ratios to be created, or to convert from one aspect ratio to another. When left as
“Simple”, the H/V components of Zoom and Shrink are adjusted equally i.e. H is equal to V.
The ‘Aspect adjust’ parameter is used to change the way that scaling of windows is controlled. By default it
is set to ‘Simple’ which allows basic control of the window zoom and shrink sizes and positions –enough for
simple tasks. In ‘Advanced’ mode, it allows the horizontal (H) and vertical (V) components of the Zoom and
Shrink functions to be adjusted independently, thus allowing custom aspect ratios to be created, or to convert
from one aspect ratio to another. In ‘Pixel’ mode, the user has direct access to pixel and line-accurate scal-
ing functions. This lets the user specify the exact co-ordinates and size of the source image (within the video
source), and the position and size of where this is placed in the output video signal. The table below summa-
rizes the different menu items in the different modes –the ‘Simple’ items have already been described earlier in
this section, so only the ‘Advanced’ and ‘Pixel’ ones that are different (highlighted in bold) will be detailed here
table needed
Scaler Adjust Scaler Adjust
Temporal interp. [Off] Temporal interp. [Off]
This is a feature only present in advanced units only. It greatly improves the method of frame-rate conversion,
by allowing the unit to merge frames together during the process. When ‘Off’, the unit will use frame-repetition
when converting 50Hz to 60Hz (i.e. it has to duplicate every 5th frame), or frame-dropping when converting
60Hz to 50Hz (i.e. it has to drop every 6thframe). When ‘On’, smooth blending is applied so that frames are not
lost, but blended together at the appropriate times.
Scaler Adjust Scaler Adjust
Image smoothing [Auto] Image smoothing [Auto]