FSR MAS-7000, Инструкция по установке и эксплуатации

Страница: 10 / 52

10
MAS-7000
ACCESSING AND USING THE ON SCREEN MENUS
MENU NAVIGATION BUTTONS
The ON SCREEN MENU is accessed via the fi ve push-button array on the right of the front panel. Push the
menu select button in the center to view the on screen display. The on screen display will remain visible for 10
seconds after the last button push before disappearing.
The ARROW UP, DOWN, LEFT and RIGHT are used to navigate through the on screen menus and change
setting values. Speci
fi cally, the ARROW RIGHT button is used to move forward through the various menu
headings or increment a value. The ARROW LEFT button is used to move backward or decrement a value.
Here are the eight root menu main group headings in the order they appear:
MODEL DISPLAY (FSR MAS-7000)
•
VIEW THE VERSION NUMBER
•
ADJUST PRESETS
•
SYSTEM SETTINGS ADVANCED MENUS (ON-OFF)
•
OUTPUT ADJUST
•
SCALER ADJUST
•
INPUT ADJUST
•
RESOLUTIONS ADJUST (only visible when “Advanced Menus” is set to “ON”).
•
SYSTEM SETTINGS
•
When a root menu heading is visible, press the menu select button to view and further select additional sub
menus under the main heading. Under each sub menu heading, changeable values will appear in brackets [
] Pressing the menu select button will cause the brackets to
fl ash. The setting value can be adjusted by pressing
the LEFT and RIGHT ARROW KEYS Press the menu button again to store the setting value. The brackets
will stop
fl ashing and remain steady at this point. After the desired setting is made, push the right or left arrow
key to navigate through and adjust additional sub menu settings. When fi nished, use the right arrow key to
navigate to the EXIT menu heading. Push the MENU SELECT button to back out to the root menus shown
above.