FSN1962 - 6/2015
24 - English
GPIO
Pin 1.
Primary and Secondary Swap. Grounding
this pin will swap the primary and second-
ary image.
Pin 2.
PIP, PBP1, PBP2, Single. Continuously
grounding this pin causes the position and
size choices to cycle.
Pin 3.
Record Indicator. The record indicator is
displayed in the top left corner when the
pin is ground to pin 4. The indicator will
vanish when the contact is opened.
Pin 4.
Connector Ground. This is the common
ground location.
Monitor
RJ9
Power Management
This monitor does not adhere to the VESA DPMS standard when no signal is present on the video
input.
Status
LED sign
Power Consumption
FS-P2601D
FS-L2701D
FS-P2601DT,
FS-L2701DT
FS-S4601D
FS-P2602D
(no LED sign)
FS-S4601DT
Normal mode
Off
<70W
<80W
<160W
Standby mode
Blinking
<20W
<10W
<13.5W
OSD power off
Constant
<20W
<8W
<13.5W
DC power off
Off
<20W
<0.5W
<0W
There are four pins on the RJ9 GPIO connector. Each pin has a pre programmed function
assigned to it. The function is initiated when the pin is grounded.
