FSN1962 - 6/2015
English - 45
Cleaning Instructions
Precautions
Before cleaning, switch the display in stand-by position to prevent the control touch panel from
being activated inadvertently by sweeping over the front filter. In stand-by position the touch
panel cannot be activated by just sweeping over them. To switch the display on again, you must
press the stand-by key again.
Take care not to damage or scratch the front filter or LCD panel.
• Be careful with rings or other jewelry that can touch the front filter.
• Do not apply pressure on the front filter or LCD panel.
• Do not apply or spray liquid directly to the front filter, panel or cabinet as excess liquid may
cause damage to internal electronics. Instead, apply the liquid to the cleaning cloth.
• Follow your hospital protocol for the handling of blood and body fluids.
• The display is not disinfected or packed in sterile environment.
• Follow your hospital protocol in case the display needs to be disinfected prior to installation.
Front Filter
Proceed as follows:
1. Remove dust with a dry, lint-free, non-abrasive soft cotton cloth.
2. Remove fingerprints or grease using a lint-free, non-abrasive soft cotton cloth that is lightly
moistened with plain water or a mild commercial glass cleaning product suited for coated
glass surfaces.
3. Gently wipe dry with a dry cloth.
The following products are tested and approved:
• Misty Clear Lemon 10 Disinfectant
• Bohle glass cleaner
• Zep Heavy-duty glass & all surface cleaner
• Klear Screen
• Screen TFT (Kontakt Chemie)
• Incidin Foam (Ecolab)
• Microzid
• Mild detergent
• Isopropyl alcohol with concentration < 5%
• Household bleach (generic sodium hypochlorite, solutions of 5.25% sodium hypochlorite
diluted with water between 1:10 and 1:100)
