FSK Rhino 232, Руководство по установке

Страница: 21 / 36

There are 2 onboard wired outputs on the panel and up to 30 wireless outputs. Each output has
the following options:
TYPE 1
The output can be global (controlled by the panel) or remote control (controlled by the user). If the
output option is set to global, the activation of this output is set in the TYPE 2 menu.
TYPE 2
Used to set how a global ( panel controlled output) is activated. The following options are available:
Not Used
The output is not used.
System Open
Output will activate when the panel is disarmed.
QUICK STAY
If this option is SET, the Quick Stay Arm (single press of the stay arm button) feature is enabled. If
not enabled, the user has to enter his code to stay arm the panel. The default is SET (quick stay
arm enabled)
QUICK BYPASS
If this option is SET, the Quick Bypass (single press of the bypass button) feature is enabled. If not
enabled, the user has to enter his code to bypass a zone. The default is SET (quick bypass enabled)
Outputs
Choose the Outputs Menu from the
Configuration Menu
PANIC ALARM
Pressing buttons 7 and 9 simultaneously will cause the panel to generate a panic alarm. The option
must be SET for this option to be activated. The default is SET.
SILENT PANIC
If the silent panic option is SET, the panel will not sound an alarm when the keypad panic button is
pressed. A duress alarm will however be sent to the response company control room. The default is
SET (silent panic).
QUICK ARM
If this option is SET, the Quick Arm (single press of the arm button) feature is enabled. If not
enabled, the user has to enter his code to arm the panel. The default is SET (quick arm enabled).
Rhino 232 Installation Manual 21 |