manualshive.com logo in svg

FSK Rhino 232, Руководство по установке, Страница: 22 / 36

Поделиться
Скачать
FSK Rhino 232 Скачать руководство пользователя страница 22

ARC (Alarm Receiving Centre)

The ARC settings determine which messages are to be sent to the monitoring centre/control room.

Protocol

The ARC protocol must be set to GSM CID in order for the alarms to be sent to the control room. If 
ARC is set to disabled, no alarms will be sent to the control room.

Alarms

The option must be SET if alarm messages (such as burglaries and panic messages) are to be sent to 
the control room.

Tampers

The option must be SET if tamper messages (such as PIR tampers, door contact tampers or alarm 
panel tampers) are to be sent to the control room. The default is SET.

available outputs on the panel (see Section 2 - Wiring the alarm panel). Wireless outputs work 
with the wireless bi-directional gate module (digital I/O).

W Serial (Wireless Serial Number)

The serial number can be typed into the serial number field or entered automatically by 
activating the tamper button on the wireless device. Refer to the in-box leaflet for the wireless 
sensor. Alternatively, the serial number for the wireless device can be entered on the keypad. The 
serial number for the wireless device is printed on the sticker on the wireless device. To type in 
the wireless serial number, type in the number written next to the ID on the label. See Appendix 
A - Hex Entry Mode.

Communications

Choose the Communications Menu 

from the Configuration Menu

Latching

The output is either ON or OFF. If this option is SET, the output is latching.

Inverted

The state of the output is inverted (ON -> OFF and OFF -> ON). For example, if an output is 
turned on when the panel is armed and the inverted state is selected, the output will then be 
turned off when the panel is armed.

Pulse

When the output is activated it will turn on for a period of time and then turn off again. For 
example, a gate controller will use a pulsed output. When this option is set, the output will 
pulse for one second when it is activated

W Type (Wiring Type)

The output can either be wired (outputs 1 and 2 only) or wireless. Wired outputs use the two 

22     Rhino 232 Installation Manual 

|

Содержание Rhino 232





































Отзывы:

Нет отзывов