© 2022 Flanders Scientific, Inc.
4
Safety Precautions
S
afety Precautions
• All operating instructions must be read and understood before the product is operated.
• These safety and operating instructions must be kept in a safe place for future reference.
• All warnings on the product and in the instructions must be observed closely.
• All operating instructions must be followed.
• Do not use attachments or accessories not recommended by the manufacturer. Use of inadequate
attachments may result in serious accidents.
• Do not place heavy objects on the power cord. Route power cord to prevent people from stepping
on or resting objects on the cord. Check to ensure that both outlet and product connection points
are properly seated and secured.
• This product must be operated on a power source as specified on the specification label or product
screening. Always operate the product within the voltage range specified.
• Do not overload AC outlets or extension cords. Overloading can cause fire or serious electric shock.
• Never insert an object into the product through vents or openings as this can cause serious electric
shock or damage.
• Do not expose product to water or other liquids as this can lead to electrical shock or permanent
damage.
• Do not attempt to service the product yourself. Removing covers can expose you to high voltage
and other unsafe conditions. Please seek the assistance of a qualified service professional for all
service needs.
• If any of the following occur, unplug the power cord from the AC outlet and consult a qualified service
professional to perform repairs:
• Power cord or plug becomes damaged.
• When any liquid is spilled on or in the product.
• When the product has been exposed to rain or water.
• When the product does not operate properly as described in the instruction manual.
• When the product has been dropped or damaged.
• Keep this product away from heat generating sources such as radiators, heaters, stoves, or other
heat generating products.
Connecting and Disconnecting SDI BNC Cables
To prevent damage to components from electrical discharge follow these steps:
• Connect power first on all devices.
• Power on all devices.
• Connect BNC cables.
To disconnect:
• Disconnect BNC cables.
• Power down and disconnect power from devices.
If using a wireless video receiver we strongly suggest using an SDI Video Ground Path Isolator
(available at ShopFSI.com and ShopFSI.eu) and powering the receiver from a separate power
source than the monitor. Use of wireless video receivers can cause dangerous ground loop issues
that can damage connected equipment like monitors. Using a ground loop isolator and powering
from a separate power source will help keep downstream equipment protected.
