Isolation Systems Inc
Operation and Maintenance Manual PASS-1600ISO
2 October, 2020
Isolation Systems Inc
16
889 Erie Ave, North Tonwanda NY, 14120
4.2.1 To remove the UV bracket, locate the electrical connection near the top of the bracket,
squeeze the two tabs on the long sides of the connector and pull the plastic halves of the
connector apart.
4.2.2 Lamps are removed by applying pressure in the direction of the spring loaded end
bracket until the other end of the lamp releases. Insert a new lamp by reversing the
procedure. The lamp shield is oriented away from the HEPA filter so that the lamp is fully
exposed to the filter.
4.3 Removal of the HEPA Filter
4.3.1 Slide the HEPA FILTER toward the end of the unit and carefully pull it out of the
compartment. If the Filter is to be discarded, carefully place it in an approved disposal bag.
HEPA INSTALLED
HEPA REMOVED
(SIDE VIEW)
PASS1600 with pre-filter,
Pressure plate and HEPA
filter removed
Front of UV lamp bracket
showing lamp shields.
Lamps are fully exposed to
the HEPA filter when
installed.