FScurtis SE Series, Руководство оператора, Страница: 28 / 42

Curtis-Toledo Rotary Compressor
CAP862
Operations and Maintenance Manual
Chapter 6 Page 3
6.4 Air/Oil Separator
The air/oil separator should be changed every 4000 hours, once a year, or when there is
excessive oil vapor in the discharge air, or as indicated by a maintenance indicator, which
ever occurs first. Higher temperature operation can cause the element to plug faster.
Consistent operation in temperatures over 180
o
F will require more frequent separator
element changes.
DA GER
Hot oil under pressure will cause severe injury, death, or property damage.
Be sure the compressor is shutdown and pressure relieved before attempting to
remove the oil filter, separator, oil fill, or change the oil.
Separator Element Replacement
Switch off the unit, disconnect the power, and lockout and tag to prevent accidental
starting.
1. Allow one minute after stopping for the system to settle and the pressure to be relieved.
2. Using a strap wrench, remove the old element and gasket.
3. Clean the gasket surface with a clean rag.
4. Apply a light film of oil to the new gasket.
5. Hand tighten the new element until the new gasket is seated in the gasket groove.
6. Continue tightening by hand an additional ½ to ¾ turn.
7. Reconnect power, reset separator service advisory.
8. Restart the machine to check for leaks.
6.5 Renewal Element Part umbers
Model Air Filter Oil Filter Separator 4000 Hour Kit
SE20 1485059-2 1485003 1485001 1486305
SE25 1485059-2 1485003 1485001 1486305
SE30 1485059-2 1485003 1485001 1486305
SE40 1485088-2 1485003 1485002 1486308
SE50 1485088-2 1485003 1485002 1486308
Use only genuine Curtis renewal parts. Substitute parts can reduce the performance and
void the warranty.