FC730-4K USER MANUAL
www.fs.com
6
Check digit: None
RS485 Communication Control
Control camera via RS485, half duplex mode:
Baud rate: 2400/4800/9600/38400;
Starting position: 1 bit
Data bit: 8 bits
Stop bit: 1 bit
Check digit: None
After power on, the camera goes to the upper right limit and then back to the middle position. The zoom lens is pulled to
the farthest position, auto focus, and the aperture is adjusted to the default value. If the camera has preset 0 saved, the
camera will be set to position 0 after the initialization is completed. At this point, the user can use the serial port command
to control the camera.
3. GUI Settings
3.1 Menu
Press [MENU] button to display the main menu on the normal screen, using arrow button to move the cursor to the item to
be set. Press the [HOME] button to enter the corresponding sub-menu.
MENU
Exposure
Color
Image
P/T/Z
Noise Reduction
Setup
Communication Setup
Restore Default
[Home] Enter
[Menu] Exit
