FC730-4K USER MANUAL
www.fs.com
13
4.2 Equipment Installation
1.Connect video conference camera to your internet or to your PC via network cable.
2.Turn on DC 12V power.
3.If the network connection is normal, the connection light (green) at the network interface will light up within 5 seconds,
and the data indicator (orange) will flash, indicating that the physical connection of the camera has been completed.
4.3 Internet Connection
There are two main ways to connect video conference camera.
1. Connect by Network Cable
2. Connect by Switch/Router
4.4 Camera Controlled by LAN
4.4.1 Setup IP Address
If you don't know camera IP, view as below:
Method 1: Press * and # and 4 on remote controller one by one, the camera IP address will be shown on screen.
Method 2: Connect camera to PC with network cable, use “upgrade_En.exe” to search for IP address.
Change IP address, two methods as below:
