FC730-4K USER MANUAL
www.fs.com
12
3.8 Communication Setup
Move the main menu cursor to
[COMMUNICATION SETUP], and press
[HOME] key enter the communication setup page, as shown in the following figure.
COMMUNICATION SETUP
Protocol
VISCA
V_Address
1
V_AddrFix
Off
Net Mode
Serial
Baudrate
9600
Select Item
Change Value
[Menu] Back
Protocol: Control protocol type, optional items: Auto, VISCA, PELCO-D, PELCO-P.
V_Address: Optional items: 1 ~ 7. (Effective only in Auto, VISCA protocol).
V_AddrFix: Optional items: On, Off (When set to On, useless in 88 30 01 FF Command).
P_D_Address: Optional items: 0 ~ 254. (Effective only in Auto, PELCO-D protocol).
P_P_Address: Optional items: 0 ~ 31. (Effective only in Auto, PELCO-P protocol).
Net Mode: Set the serial port network control, optional items: Serial, Paral.
Baudrate: Serial port baud rate, optional items: 2400, 4800, 9600, 38400.
3.9 Restore Default
Move the main menu cursor to [RESTORE DEFAULT], and press [HOME] key enter the restore default page, as shown in the
following figure.
RESTORE DEFAULT
Restore?
No
Change Value
[Home] OK
[Menu] Back
Restore: Confirm restore factory settings, optional items: Yes, No.
Note: Press [HOME] button to confirm, all parameter restore default, include IR Remote address and VISICA address.
4. Network Function
4.1 Operating Environment
Operating System: Windows 7/8/10, Mac OS X, Linux, Android
Network Protocol: TCP/IP
Client PC: P4/128M RAM/40G HDD/ support
scaled graphics card, support DirectX 8.0 or more advanced version.
