FC730-4K USER MANUAL
www.fs.com
11
3.7 Setup
Move the main menu cursor to [SETUP], and press [HOME] key enter the setup page, as shown in the following figure.
SETUP
Language
EN
DVI Mode
DVI
Auto Scan Shoot
Off
SDI-3G Mode
LEVEL-A
Auto Inversion
Off
Trace Mode
On
Tally Mode
On
Select Item
Change Value
[Menu] Back
Language: Optional items: EN, Chinese, Russian.
DVI Mode: Optional items: DVI, HDMI.
Auto Scan Shoot: Optional items: On, Off.
SDI-3G Mode: Optional items: LEVEL-A, LEVEL-B.
Auto Inversion: Optional items: On, Off.
Trace Mode: Optional items: On, Off.
Tally Mode: Optional items: On, Off.
Note: How to enable the trace function
1. Use the remote control, enter the menu-setup-tracking mode, switch to "On", set the appropriate trace Mutiple, the
Guard can choose the "Home" position or the preset position "9", and exit the OSD menu;
2. Long press the "Home" button of the remote control for more than 5 seconds, "Target Telection" box will appear. Press
the number key of the remote control to select a single ID target and press the "Home" button to confirm, which will
automatically enter the tracking state;
3. When the target is lost and there is no other humanoid target, the camera will return to the Home position or preset
position 9;
4. If you need to turn off the tracking mode, long press the remote control "Home" button for more than 5 seconds, "Out of
Track" box will appear, press the remote control "Home" button to exit.
