Frymaster Pasta Magic 17/8BC, Инструкция по установке, эксплуатации и обслуживанию, Страница: 13 / 22

3-1
ELECTRIC COOKER MODELS 17/8SMS, 17/8BC, 17/8C
CHAPTER 3: OPERATING INSTRUCTIONS
3.1 Spaghetti
Magic III Controller
1
5 4 3 2 7
8 9 6
1 Numeric Keypad 6 Skim Switch (w/Autoskim only)
2 Boil Mode Indicator 7 Timer Start Switch
3 Boil Mode Switch 8 Simmer Mode Switch
4 Power Switch 9 Simmer Mode Indicator
5 LED Display
3.1.1 Introduction
The Spaghetti Magic III computer allows the operator to specify a specific cook time in minutes and
seconds, then initiate a cooking cycle. The computer is configured for both automatic filling
(AutoFill) and automatic skimming (Autoskim) features.
The BOIL mode is used when actually cooking pasta.
The SIMMER mode feature maintains the water temperature just below boiling (approximately
195ºF/90.6ºC), which conserves energy and water. This feature is designed to keep the cooker in
standby.
The SKIM feature, when selected, adds water for approximately 3 seconds once a minute. It causes
the water to overflow into the drain, carrying floating starch with it. (A buildup of starch reduces the
efficiency of the cooker and can cause erroneous temperature and water level sensing.)
LOW WATER SENSING automatically de-energizes the heating element if the water in the
cookpot drops too low. When the water level in the cookpot is below the sensor probes, such as
when draining and cleaning the cookpot, the controller display will read
LO
.
NORMAL WATER LEVEL SENSING , on units configured with the AutoFill feature,
automatically adds water during or after a cooking cycle if the water level is low. With this
automatic filling feature, the water level does not have to be continuously monitored. The cookpot
always has the correct amount of water.