manualshive.com logo in svg

Frymaster FilterQuick Series, Техническое справочное руководство

Поделиться
Скачать
Frymaster FilterQuick Series Скачать руководство пользователя страница 74

Automatic Filtering Fryers

4-30

CODE

ERROR MESSAGE

EXPLANATION

E01

M3000 ONLY

REMOVE DISCARD (Right)

A product cook is started on the right side of a split vat or in 
a full vat that has a different setpoint other than the current 
vat temperature.

E02

M3000 ONLY

REMOVE DISCARD (Left)

A product cook is started on the right side of a split vat or in 
a full vat that has a different setpoint other than the current 
vat temperature.

E03

ERROR TEMP PROBE FAILURE

TEMP Probe reading out of range.

E04

HI 2 BAD

High limit reading is out of range.

E05

HOT HI 1

High limit temperature is more than 410°F (210°C), or in 
CE countries, 395°F (202°C).

E06

HEATING FAILURE

A component has failed in the high limit circuit such as 
controller, interface board, contactor or open-high limit.

E07

ERROR MIB SOFTWARE

Internal MIB software error.

E08

ERROR ATO BOARD

MIB detects ATO board connection lost; ATO board failure.

E09

ERROR PUMP NOT FILLING

Oil not returning to vat quickly. Possible problems: dirty 
pad, bad or missing O-rings, tripped or defective fi lter 
pump, actuators or linkage.

E10

ERROR DRAIN VALVE NOT OPEN

Drain valve failed to open; valve’s position is unknown.

E11

ERROR DRAIN VALVE NOT CLOSED

Drain valve failed to close; valve’s position is unknown.

E12

ERROR RETURN VALVE NOT OPEN

Return valve failed to open; valve’s position is unknown.

E13

ERROR RETURN VALVE NOT CLOSED

Return valve failed to close; valve’s position is unknown.

E14

ERROR AIF BOARD

MIB detects AIF missing; AIF board failure.

E15

ERROR MIB BOARD

Cooking controller detects MIB connections lost; check 
software version on each controller. If versions are missing, 
check CAN connections between each controller; MIB 
board failure.

E16

ERROR AIF PROBE

AIF RTD reading out of range.

E17

ERROR ATO PROBE

ATO RTD reading out of range.

E18

Not Used

E19

CAN TX FULL©

Connection between controllers lost.

E20

INVALID CODE LOCATION

SD card removed during update.

E21

FILTER PAD/PAPER PROCEDURE ER-
ROR (Change Filter Pad or Paper)

25 hour timer has expired or dirty fi lter logic has activated.

E22

OIL IN PAN ERROR

The MIB has detected oil may be in the pan.

E23

CLOGGED DRAIN (Gas)

Vat did not empty during fi ltration.

E24

OIL RETURN (level) SENSOR FAILED 
(Gas)

Oil return sensor may have failed.

E25

RECOVERY FAULT

Recovery time exceeded maximum time limit.

E26

M3000 ONLY

RECOVERY FAULT CALL SERVICE

Recovery time exceeded maximum time limit for two or 
more cycles.

E27

LOW TEMP ALARM

Oil temperature has dropped lower than 15°F (8°C) in idle 
mode or 45°F (25°C) in cook mode.

E28

FilterQuick3000 ONLY

HIGH TEMP ALARM 

Oil temperature has risen 40°F (22.2°C) higher than 
setpoint. If temperature continues to rise, the high limit 
will shut the power off at 425°F (218°C) Non-CE or 395°F 
(202°C) CE.

LOV/FQ Error Codes

Содержание FilterQuick Series











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды