manualshive.com logo in svg

Frymaster FilterQuick Series, Техническое справочное руководство

Поделиться
Скачать
Frymaster FilterQuick Series Скачать руководство пользователя страница 57

Automatic Filtering Fryers

4-13

Problem

Probable Cause

Corrective Action

Auto fi ltration 
won’t start.

1. Filter pan out of position.
2. Oil Level is too low.
3. Ensure MIB board is not in 

manual mode.

4. Ensure MIB cover is not 

damaged and pressing 
against buttons.

5. Filter relay has failed.

6. AIF disable*

 is set to YES, 

blue light doesn’t light.

7. Filter motor thermal switch 

is tripped.

8. AIF clock* 

enabled.

1. Ensure fi lter pan is fully inserted into fryer.
2. Ensure oil level is above the oil level sen-

sor.

3. Ensure MIB board is in “A” automatic 

mode.

4. Remove and replace cover and see if fi ltra-

tion will start.

5. Replace fi lter relay with part number 807-

4482 24VDC relay.

6. Set AIF* disable

 in Level 1 to NO.

7. Press fi lter motor thermal switch.

8. Ensure AIF*

 clock is set to disabled.

MIB display shows 
something other 
than an “A” or vat 
number.

An error has occurred and 
displayed character indicates 
error.

See MIB display diagnostics on page 1-9  for 
explanation.

No power present 
at the MIB board

Transformer has failed in left 
component box.

Check output on the left transformer in left 
component box; should read 24VAC.  If not 
replace transformer.

MIB will not clear 
error.

Error remains in non-volatile 
memory.

Press and hold reset button in top right cor-
ner for fi ve seconds. The drain, return and 
manual/auto LED’s will illuminate and the MIB 
will reset and clear any remaining errors from 
memory. Allow 60 seconds to reset. If an error 
still exists, there’s another issue.

MIB indicates in-
correct number of 
vats.

• Network is not terminated 
correctly.
• Wiring harnesses are loose 
or damaged.
• AIF board issue.
• Locator pin issue.

Ensure the CAN bus system is terminated at 

BOTH ENDS

 (on the controller connector J6 

and on the ATO board connector J9) with a 
resistor-equipped 6-pin connector.   
• 

Unplug and reseat all wiring harnesses in 
CAN system.  Resistance between pins 
2 and 3 on the CAN network connectors 
should be 120 ohms.

• 

Check software version numbers on all 
controllers and ensure all display an AIF 
version.  If an AIF version is missing, the 
AIF board may be missing power.  Check 
pins 5 and on J4 and J5 of the affected 
AIF board for proper voltage. 

• 

The locator pin in J2 of the AIF board is ei-
ther loose or in the incorrect position.  See 
the chart on page 4-45..

Troubleshooting the Manual Interface Board (MIB)

* McDonald’s only

Содержание FilterQuick Series











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды