FrSky TARANIS X9D, Руководство пользователя

Страница: 6 / 24

www.frsky-rc.com
FrSky Electronic Co., Ltd
Tel: (86) 0510-85187718 Fax: (86) 0510-85187728 E-mail: frsky@frsky-rc.com Technical Support: sales4tech@gmail.com
5
PAGE3: TRAINER
Pressing the PAGE again,TARANIS will show the
trainer function menu. This menu allows the PPMin
(trainer) inputs to be configured. It enables the
RAW PPM inputs to be selected to replace the sticks
for training purposes. The student transmitter does
not need to have the same model setup as the
instructor. All the mixes on the instructors Tx will
be applied to the student inputs. If, for example, you
have expo on your sticks, this will be applied to the
raw trainer inputs when they are selected.
The mode entry selects how the PPMin value is
used:
off unused
+= add to instructor stick value
:= replace instructor stick value

The % entry applies a weighting to the PPMin
value -100 to 100, Use -100 to reverse the
input. Use values closer to 0 to reduce the
students control sensitivity.

Multiplier 0.0 to 5.0 scale for PPMin values.The
multiplier does as it's name suggests. It
multiplies the ppm Input by a set amount.
Great for dealing with different tx's whose
makers don't know how to encode PPM.

CAL: Center calibration for first 4 PPMin
values.This entry allows you to calibrate the
mid point for the first 4 input PPM
channels.Highlighting “Cal” and pressing
[MENU] will calibrate the mid point for all PPM
IN channels.
PAGE4: VERSION
This screen shows the version information for
the current firmware version.

VER: The version of the current firmware.

DATE: Compile date for the current
firmware.

EEPR: The eeprom space has been used
PAGE5: SWITCH TEST
This menu will help you to visualize the current
state of the trims and navigation keys.
PAGE6: ANALOG INPUTS

Here you can see the analog inputs in
hexadecimal format to save space and annoy
you at the same time.

A1..A4 are the gimbals (sticks).