www.frsky-rc.com
FrSky Electronic Co., Ltd
Tel: (86) 0510-85187718 Fax: (86) 0510-85187728 E-mail: [email protected] Technical Support:
13
Alt 10 would trigger once every time Altitude
goes up by 10m. |d|>x Alt 10 would trigger
once everytime Altitude goes up OR down by
10m
Custom switches offer 3 more parameters: An
extra AND condition (if selected, must be on for the
custom switch to become active), a Duration
parameter (the minimum time a custom switch will
be active for even if its conditions become false
instantly), and a delay parameter (that affects both
activation and deactivation).
PAGE11:
CUSTOM
FUNCTIONS
This is the place where switches can be used to
trigger special functions such as trainer mode,
soundtrack playback, speech of variables etc.
The first column selects the trigger, which can be
any switch (physical or custom) or ON (always on).
A long press of the ENTER key will switch to
"toggle" mode (ending with TIM), i.e. the selected
input will be turned on when the selected switch is
activated, and will remain on until it is deactivated
and reactivated again. Scrolling through the list you
will also find a few more options: One (triggers just
once when loading a model or turning the radio on),
SHdownS (short press of the momentary switch),
SHdownL (long press of the momentary switch).
The available functions are:
Safety CHx: When active, the output of CHx is
forced to the selected value. A checkbox is
there to enable the function, which you would
typically do after ensuring the value is set
correctly and the switch is off if your model is
powered.
Trainer, TrainerXXX: Enables trainer mode
globally, and for individual functions. Unless a
custom function is set for an individual
function, turning the one set for Trainer
automatically activates all 4 sticks.
Instant trim: When activating the selected
switch the current stick positions will be added
to their respective trims.
Play Sound: Play a simple tone from the
available list.
Reset: Resets the selected items (Timer 1,
Timer 2, telemetry values, or all of those).
Vario: Turns on variometer sounds (see
Telemetry setup).
Play track: Plays a sound file from the micro
SD , with repeats at the specified interval.
Play value: Speaks the current value of the
selected parameter, with repeats at the
specified interval.
SD Logs: Logs the telemetry values to micro SD
at the specified interval.
Volume: Adjusts sound volume using the
selected source.
Backlight: Turns backlight on
BgMusic, BgMusic || (pause): Plays a selected
soundtrack from the micro SD. The BgMusic
Pause item pauses the track and resumes it
once inactive again, while switching BgMusic
off stops the track completely.
Adjust GVx: When active, sets the relevant
global variable to the value of the specified
source. The adjustment source can be one of 4
groups cycled through using a long press of the
MENU key:
A fixed value
A proportional control, or a channel with for
example specified curve/weight/offset to limit the
adjustment range
