background image

SAFETY - continued 

OM 0401-A 

7

Debris Blower Operation 

1. 

Before leaving the tractor/debris blower 
unattended, take all possible precautions. 
Park the tractor/debris blower on level 
ground, set the parking brake, disengage 
debris blower drive, lower the debris blower 
to the ground, place all levers including 
auxiliary control levers in neutral, shut off the 
engine and remove the ignition key. 

2. 

Prior to operation, clear work area of all 
objects that can be picked up and thrown. 
Mark all curbs, pipes, etc. that cannot be 
moved. 

3. 

Be sure the debris blower drive is in OFF 
position before starting engine. 

4. 

Exercise extreme caution when operating on 
or crossing a gravel drive, walks, or roads. 
Stay alert for hidden hazards or traffic.  

5. 

Do not carry passengers. 

6. 

Keep clear of all rotating parts. Do not put 
hands or feet under, or into debris blower 
with engine running. Be especially 
observant of the debris blower areas of 
discharge, intake or all other mechanical 
motions.  

7. 

Park the tractor/debris blower on level 
ground, set the parking brake, disengage 
the debris blower drive, lower the debris 
blower to the ground, place all control levers 
in neutral, shut off the engine, remove the 
ignition key and allow the rotating parts to 
stop BEFORE making any repairs, 
adjustments or inspections.  

8. 

If the debris blower starts to vibrate 
abnormally, disengage the pulley, stop the 
engine immediately and check for cause. 
Excessive vibration is generally a sign of 
trouble. 

9. 

Do not run the engine indoors except when 
starting engine and transporting attachment 
in or out of building. Carbon monoxide gas 
is colorless, odorless and deadly. 

10. 

Do not attempt to operate on steep slopes. If 
operating on slopes is necessary, exercise 
extreme caution when changing direction. 

11. 

Never operate debris blower without guards, 
and other safety protective devices in place. 
All tractor and debris blower shields and 
covers must be correctly installed at all times. 
When necessary to remove these, they must 
be reinstalled immediately. 

12. 

Never operate debris blower near glass 
enclosures, automobiles, window wells, 
embankments, etc., without proper 
adjustment of the angling deflector. 

13. 

Never operate machine at high transport 
speeds on a slippery surface. 

14. 

Use extra caution when backing up. 

15. 

Disengage power to debris blower when 
transporting or when not in use. 

16. 

Never operate the debris blower without good 
visibility and lighting. 

17. 

Prolonged exposure to loud noise can cause 
impairment or loss of hearing. Wear a 
suitable hearing protective device such as 
earmuffs or earplugs to protect against 
objectionable or uncomfortable noises. 

18. 

Never allow anyone near the work area. 

19. 

Never allow anyone to operate the debris 
blower until they have read the manual 
completely and are thoroughly familiar with 
basic tractor and debris blower operation. 

20. 

Always make sure all debris blower 
components are properly installed and 
securely fastened BEFORE operation. 

21. 

Keep away from discharge. This debris 
blower has the capacity to throw debris at far 
distances. 

22. 

Never direct discharge towards people or 
animals. Thrown debris can cause serious 
injury. 

 

Содержание BL2130













































Отзывы: