SAFETY - continued
OM 0401-A
10
M
AINTENANCE
ALWAYS USE GENUINE PARTS WHEN
REPLACEMENT PARTS ARE REQUIRED
1.
Keep the tractor and equipment properly
maintained.
2.
Park the tractor/ equipment on level ground,
place the transmission in neutral, set the
parking brake, disengage the PTO, lower
the equipment to the ground, place all
control levers in neutral, shut off the engine
and remove the ignition key and allow the
rotating parts to stop BEFORE making any
equipment adjustments.
3.
To avoid injury, do not adjust, unblock the
driving system, or service the equipment
with the tractor engine running. Make sure
rotating components have completely
stopped before leaving the operator’s seat.
4.
Keep the tractor/ equipment clean. Snow ,
dirt or ice build-up can lead to malfunction
or personal injury from thawing and
refreezing in garage.
5.
Always wear eye protection when cleaning
or servicing the equipment.
6.
DO NOT service the tractor while the
engine is running or hot, or if the unit is in
motion. Always lower equipment to the
ground. If necessary to service equipment
in raised position, securely support with
stands or suitable blocking before working
underneath. Do not rely on hydraulically
supported devices for your safety. They can
settle suddenly, leak down, or be
accidentally lowered.
7.
Do not attempt to service machine, clear
obstructions or unclog the equipment's
driving system with the engine running.
Always shut off engine and allow all motion
to cease.
8.
The manufacturer will not accept
responsibility for fitment of unapproved
parts and/or accessories and any damages
as a result of their use.
9.
Make sure all shields and guards are
securely in place following all service,
cleaning, or repair work.
10.
Do not modify or alter this equipment or
any of its components or operating
functions. If you have questions
concerning modifications, consult with
your dealer.
11.
Do not operate a equipment that is
defective or has missing parts. Make sure
that all recommended maintenance
procedures are completed before
operating the equipment.
12.
Check all controls regularly and adjust
where necessary. Make sure that the
brakes are evenly adjusted.
13.
Periodically check all nuts and bolts for
tightness, especially wheel hub and rim
nuts.
14.
To avoid serious personal injury:
Escaping hydraulic/diesel fluid under
pressure can penetrate the skin causing
serious injury. Do not use your hands to
check for leaks. Use a piece of cardboard
or paper to search for leaks.
15.
Stop engine and relieve pressure before
connecting or disconnecting hydraulic
hoses. Tighten all connections before
starting engine or pressurizing hoses.
Содержание BL2130
